CJMCU 64 Bit 8 - 8 WS2812 5050 RGB LED Driver Development Board

The CJMCU 64 Bit 8x8 RGB LED Driver Development Board features a large board with 64 WS2812 RGB LEDs arranged in an 8x8 matrix. Each LED can draw up to 60mA, totaling over 3.5 Amps at 5 Volts for the entire matrix. It is recommended to use a 5V 2A power supply, although for more than four panels, a 5V 10A power supply may be necessary.

The board has two 3-pin connection ports for wiring. Solder wires to the input port and provide 5VDC to the +5V and ground pins. Connect the DIN pin to your microcontroller and create a common ground from the 5V power supply to the microcontroller/Arduino.

You can chain multiple panels together. For the second panel, connect the DIN connection to the first panel€™s DOUT, and connect the ground pins together. Every stick is equipped with a single data line with a specific protocol requiring a real-time microcontroller with an 8MHz or faster processor.

  Features:  

• Full-color 8x8 64-bit RGB LED WS2812 Module Board
• Cascading port transmission signal by a single line
• Built-in electric reset circuit and power lost reset circuit
• Built-in signal reshaping circuit to ensure waveform distortion does not accumulate
• Each pixel of the three primary colors can achieve 256 brightness levels, completing a 16,777,216 color full-color display
• Refresh rate is 30fps, cascade number is not less than 1024 points
• Send data at speeds of 800Kbps
• Widely used for LED decorative lighting, indoor/outdoor LED video irregular screens

  Specifications:  

• IC Chip: WS2812B
• LED Type: 5050 LED
• Input Supply Voltage: 5VDC
• LED: 8x8 (64 RGB)
• PCB Size: 66 x 66 mm
• Weight: 25g

  Package Includes:  

• 1 x CJMCU 64 Bit 8x8 RGB LED Driver Development Board