E3D v6 J-Head Hotend Extruder 1.75mm Filament 0.2mm Nozzle w/Fan Duct and PTFE tube

The E3D v6 J-Head Hotend Extruder 1.75mm Filament 0.2mm Nozzle w/Fan Duct is a high-performance hotend designed for 3D printing. It offers a wide range of features and benefits, including:

• Wide Material Compatibility: It allows you to print a wide range of materials, including high-temperature materials and flexible filaments like NinjaFlex, FlexPLA, and FlexPolyester.
• High Temperature Performance: With no PEEK or PTFE in hot regions, it can reach temperatures up to 300°C with the supplied thermistor, and over 400°C with a thermocouple.
• Fast Heat-Up Times: The new heater block design provides fast heat-up times, allowing you to go from 20°C to 200°C in just 65 seconds.
• Reduced Bulk: The overall length of the hotend is just 62mm, with significant reductions in bulk in the X/Y dimensions.
• Easy Assembly and Maintenance: No soldering, tape, or adhesives are required for assembly. The thermistor clamps into place with a small screw, and high-temperature glass sleeving is used to insulate the thermistor legs.
• High-Quality Printing: The hotend features a sharp thermal transition that provides high-quality printing performance with less stringing, oozing, or blobs on prints.
• Adaptable Nozzle Sizes: The range of nozzle sizes allows you to choose how you want to print, with options for increased resolution in smaller nozzle sizes and fast, strong prints with larger nozzles.
• Easy Mounting: The hotend is designed with the same 16mm Groove mount dimensions as the v5, ensuring compatibility with a wide range of community-designed mounts.

  Specifications:  

• Nozzle Diameter: 0.2mm
• Material: Metal
• Operating Voltage: 12V
• Feed Diameter: For 1.75mm Filaments
• Power Consumption: 40W
• Dimensions (mm) LxWxH: (DxL) 40 x 62.14
• Weight: 72g

  Package Includes:  

• 1 x Aluminium Heatsink (Contains embedded fitting for tubing in 1.75mm)
• 1 x Stainless Steel Heatbreak
• 1 x Brass Nozzle (0.2mm)
• 1 x Aluminium Heater Block
• 1 x 100K Semitec NTC thermistor
• 1 x 12v 30 x 30 x 10mm Cooling fan with Fan Duct
• 1 x High-Temperature Fiberglass Wire – for Thermistor (150mm)
• 1 x PTFE tube

This hotend is suitable for users looking for high-performance and versatility in their 3D printing projects.