MPU-6050 QFN-24 3-Axis Gyro/Accelerometer IC MEMS Motion Tracking Device - 24-Pin
MPU-6050 QFN-24 3-Axis Gyro/Accelerometer IC MEMS Motion Tracking Device - 24-Pin
SKU:CR5017
Regular price
Rs. 405.00
Regular price
Rs. 458.00
Sale price
Rs. 405.00
Unit price
/
per
Prices shown include all taxes
Out of stock
The MPU-6050 QFN-24 3-Axis Gyro/Accelerometer IC is a sophisticated motion processing IC that combines a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die, along with an onboard Digital Motion Processor„¢ (DMP„¢). This combination allows for complex 9-axis MotionFusion algorithms, eliminating cross-axis alignment problems that can occur with discrete parts.
Features:
- User-programmable digital filters for gyroscope, accelerometer, and temperature sensor
- Digital-output temperature sensor
- Auxiliary master I2C bus for reading data from external sensors
- Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
- MEMS structure is hermetically sealed and bonded at the wafer level
- 400 kHz fast mode I2C for communicating with all registers
- Tri-Axis angular rate sensor (gyro) with a sensitivity of up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g, and ±16g
- Reduced settling effects and sensor drift by eliminating board-level cross-axis alignment errors
- 9-Axis Digital Motion Processing (DMP) engine for MotionFusion, sensor timing synchronization, and gesture detection
- Embedded algorithms for run-time bias and compass calibration with no user intervention required
- Programmable interrupt supports various functions like gesture recognition, panning, zooming, scrolling, free fall interrupt, high-G interrupt, zero-motion detection, tap detection, and shake detection
- VDD Supply voltage range of 2.375V–3.46V
- VLOGIC at 1.8V±5% or VDD
- On-chip timing generator with ±1% frequency variation over the full temperature range
- 10,000 g shock tolerant
Specifications:
- Package/Case: QFN-24
- Mounting Type: SMD/SMT
- Sensitivity: 340 LSB/C
- Sensor Type: 6-axis
- Sensing Axis: X, Y, Z
- Acceleration (g): 10000
- Interface Type: I2C
- Output Type: Digital
- Maximum Supply Voltage (V): 3.46
- Minimum Supply Voltage (V): 2.375
- Max. Operating Current (mA): 3.9
- Operating Temperature Range (°C): -40 to 105
- Dimensions (mm) LxWxH: 4x4x0.9
Package Includes:
- 1 x MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC