TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer

The TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer is a versatile USB-to-serial converter based on the FT232RL chip. Here are the key features and specifications:

  Features:  

1. Automatic detection of data transfer speeds up to 1Mbps.
2. Data exchange capability with an external interface with UART protocol.
3. Output voltage 5V and 3.3V with indicator LEDs.
4. Supports RX and TX indicator LEDs.
5. Management system for reducing flow in idle and standby mode.
6. Supports serial output devices such as modems, card reader devices, and digital cameras.
7. Interface: Mini USB.
8. +3.3V and +5.0V signal level support using SMD jumper.
9. Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0.
10. DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads.

  Specifications:  

1. IC Chip: FT232RL.
2. Connector Type: Mini USB.
3. Length: 25mm.
4. Width: 16mm.
5. Height: 6mm.
6. Weight: 4g.

  Applications:  

1. Programming of Arduino Pro Mini with Automatic RESET through DTR pin.
2. Programming of Microcontrollers that can be programmed using serial bootloaders at 3.3V or 5.0V logic levels.
3. Burn write STC MCU, NXP MCU, Renesas MCU, NEC MCU.
4. Data exchange between microcontroller and Desktop or Laptop Computers.
5. Connection with GPS Devices.
6. Connection with various external Phones, or modems, GSM Modules.
7. Router, HDD, ADSL, broadband modem firmware upgrade.
8. Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on.
9. Simple UART communication commonly used UART debugging tools in super terminal.
10. USB signal transferred to TTL signal may be used by electronic enthusiasts.
11. Two data transmission indicator can monitor data transfer status in real-time.
12. 3.3V and 5V power supply interface, easy for the DDWRT of different voltage system that needs power.

  Package Includes:  

• 1 x TTL FTDI Transmitter USB For 3.3V 5V dual power module.