Voltage to PWM Converter Module 0%-100% to 0-5V/0-10V for Digital Analog

The Voltage to PWM Converter Module is designed to convert a voltage or PWM signal into an analog voltage output. It can convert a PWM digital signal into a 0 to 10V analog signal, with the output voltage being adjusted by the duty cycle of the entire PWM. Conversely, it can also convert a 0-5V or 0-10V voltage to a 0%-100% PWM output, allowing for adjustment of the PWM duty cycle by adjusting the voltage.

  Features:  

• Supports a wide range of PWM duty cycles, typically ranging from 0% to 100%.
• Capable of converting PWM signal into an analog voltage within a specified range, such as 0-5V or 0-10V.
• Provides high resolution and accuracy in converting PWM signal to analog voltage.
• Eliminates potential noise or fluctuations in the PWM signal.
• The module should have protection mechanisms to guard against overvoltage, overcurrent, and other potential electrical faults.

  Specifications:  

• Working voltage: DC 5V-12V
• Output PWM frequency: about 50KHZ
• PWM amplitude: 5V
• Conversion range: 0-5V/0-10V
• Voltage conversion: 0%-100% PWM
• Tolerance: 1%-3%
• Dimension: 31x33mm
• Weight: 10g

  Pin Description:  

• VCC: Working power supply 5V-12V.
• GND: Working power ground.
• VIN: Input voltage 0-10V.
• GND: Input signal negative terminal.
• GND: Output PWM ground.
• PWM: Output PWM.

  Instructions for Use:  

1. Connect the working voltage to VCC and GND. Do not connect them in reverse to avoid damage to the board and devices.
2. Connect a controllable voltage to the VIN terminal. The voltage range is divided into two types: 0-5V and 0-10V according to the selected mode.
3. The PWM output is PWM. The duty cycle can be adjusted by adjusting the voltage. The accuracy can be controlled by adjusting the potentiometer.

  Package Includes:  

• 1 x Voltage to PWM Converter Module 0%-100% to 0-5V/0-10V for Digital Analog